19 replies to this topic

[nook171]

hey all im new here but 4 odd months back i started rebuilding a 1968 HK holden with a 202 i have rebuilt the engine i put a yella terra head with roller rockers then bored it out to a 243 it has a straight through twin side pipes and is running twin 350 holleys but now i want to give it some real guts so i was wondering what can i do?

cheers nick

[SiKnEsS]

get a v8 lol, nah, why not slap that head u have on a blue bottom end, big solid cam, and a 650dp instead of 2 350's?,a m8 of mine had a similar setup in his lj torana and only managed a 14.9 quarter in it, also, how did u manage to bore out a 202ci an extra 41 cubes? ive heard of a stroked 202-236ci typo i suppose? :s

Edited by SiKnEsS, 31 October 2008 - 03:15 PM.

[nook171]

nah mate they guy who i got if off got it rebored and it was a custom head or some shit but has all the paper work for it i just rebuilt it thats all and chucked on the twin 350 im thinkin of putting a supercharger or a turbo

[nqkjw]

Mate's Torana.He lives in Wulguru.
Fot the record I doubt your overbore.Did you measure the bore size when you rebuilt the engine?You would have to have to order rings.

243 inch works ot to a 213thou overbore.I don't think so.

BTW - top marks for owning a classic.

[SiKnEsS]

not unless ur using water jackets as a bore? post up some pics, be interesting to c these twin 350's on a 202

[ljxu1torana]

if you want a 234 stroker you have to use a 186 bottom end. as i have turbo charged lj torana with a 186 bottom end with 202 dished pistons . pro stroke do a 234 bottom end for about $2000 plus freight .

[nook171]

sorry guys read it wrong it's 223 and yea classics are mint the hk is my first car and love it lol what does a supercharger kit cost?

Edited by nook171, 01 November 2008 - 10:57 AM.

[nook171]

these are some old pics since then she has been soda blasted and 2pac primed waiting to get her sprayed now i have to wait till feb to get that done then i can start doing the interior then do a bit more to the engine

 tt_027.JPG   919.61K   24 downloads
 tt_028.JPG   921.29K   16 downloads

Edited by nook171, 01 November 2008 - 10:57 AM.

[old school]

sorry guys read it wrong it's 223 and yea classics are mint the hk is my first car and love it lol what does a supercharger kit cost?

crs do a blower kit with the toyota sc14 blower for about 2k

[turbotorana]

this is my turboed 202 blue motor,650 holley,port job on the head,small cam,t04 turbo garret stratta kit 15psi,water/methonol injection its in a lj torana. went 14.0 100mph with a smaller carbie 2.7 open center diff 13'' street tyres. Not a bad setup if your planning of goin this way with your motor., but might not go quite as well in a heaver kingy.

Attached Files

•  DSC00012.JPG   140.97K   24 downloads
•  DSC00039.JPG   250.47K   24 downloads

[ohbaby]

this is my turboed 202 blue motor,650 holley,port job on the head,small cam,t04 turbo garret stratta kit 15psi,water/methonol injection its in a lj torana. went 14.0 100mph with a smaller carbie 2.7 open center diff 13'' street tyres. Not a bad setup if your planning of goin this way with your motor., but might not go quite as well in a heaver kingy.

nice setup when you taking me for a strap in this thing ! looks so uniquE. . .

[VKGRP3]

this is my turboed 202 blue motor,650 holley,port job on the head,small cam,t04 turbo garret stratta kit 15psi,water/methonol injection its in a lj torana. went 14.0 100mph with a smaller carbie 2.7 open center diff 13'' street tyres. Not a bad setup if your planning of goin this way with your motor., but might not go quite as well in a heaver kingy.

Me uncle had the t04 with red, in ss lx hatchback with the water meth injection and it ran real well just got to pick your jets right, and have good dizzy.....

[lxtorrie]

I worked the tits off the 202 in my old torana...ended up doing 14.5 and that was it.
For the money I spent on it, I should have went a 308 and I would still have enough left over to keep the fridge stocked with beer for a month.

Good on you for working the ol 202. They are a tough little motor, easy to work on...but their head design really lets them down.

Best bang for buck 202 out there, is the EFI black motor. Made more power than the 253 stock for stock.
I ended up putting one in my torrie after the 14.5sec runs eventually killed it (spun a main bearing, and took the top off 2 pistons- they really dont like to rev).

The efi runs great, and you can even put the fuel injection on to the red motor you already have. Whole VK can be picked up running for no more than $500 and the mod is fairly easy to do.

The black motor head flows better as its a 12port and not the 9 port....and you wont have any problems with extractors fouling with the amount of room you will have in your kingy. You also get the bonus addition of an electronic dizzy and power steering out of the VK. If your interested in the mod google sammy old holden EFI as he has done the mods on heaps of holdens. Their is also a great wiring diagram and step by step install guide.

Edited by lxtorrie, 26 January 2009 - 01:09 AM.

[lozza]

Speaking of 202's my vl speedway car houses one with knife edge crank roller cam 1.7 rockers flat tops 0 deck 9 port head ecotech v6 vavles 220lb's on seat 590 full lift. 186s manifold 350 holey 500 base 236HP at 7800 on meth. Alot of $$$$$ spent on development and is realiable.

[SiKnEsS]

its just u cant shake that 'donut king' title once and a while ay laurie lol,

[lozza]

well i try. this year should be better. new engine on the stand to.

[SiKnEsS]

thats the go m8, I mite actually find sum traction this year lol, only a month or so to go,,

[gofastorgoaway]

lozza, on 19 February 2009 - 07:56 PM, said:

Speaking of 202's my vl speedway car houses one with knife edge crank roller cam 1.7 rockers flat tops 0 deck 9 port head ecotech v6 vavles 220lb's on seat 590 full lift. 186s manifold 350 holey 500 base 236HP at 7800 on meth. Alot of $$ spent on development and is realiable.

Hi Lozza I have a torana lc speedway car with a 179 with enderle mechanial injection on meth which makes 181 rwhp at 7000 my previous motor was a 234 which went 230 rwhp on same setup I have now fitted a strata 6 turbo to chase the v8 speedway cars I have so many 6 cylinder combinations here to try. I stuffed my stroker when car turned in hard at Gladstone & went past the 6500 rpm limiter & the telltale said 8700 rpm it bent the crank in three places on the mains.

[4xnick]

Basically you want a blue bottom end and rods, good compression, big cam, good (not necessarily a lot) of head work, HEI and heaps of air and fuel, for example triple carbs!




Here's couple of handy articles for all those interested in quick old sixes...




Building a High Performance Holden Six




http://www.fbekholde...hp?f=25&t=11361

[Unslanted]

nqkjw, on 31 October 2008 - 06:27 PM, said:

Mate's Torana.He lives in Wulguru.
Fot the record I doubt your overbore.Did you measure the bore size when you rebuilt the engine?You would have to have to order rings.

243 inch works ot to a 213thou overbore.I don't think so.

BTW - top marks for owning a classic.

That's nice nqkjw, but I thought you usually beefed up 202's by doing this...........


or perhaps this.


Put some mopar in your car?

Edited by Unslanted, 09 December 2010 - 09:49 PM.