10 replies to this topic

[YLD_13]

Hey guys I have a few spare parts left from my project s13 silvia.

All prices are very negotiable, i really need them all gone as i will be moving soon. Make me a offer and score a real bargain!

All parts are located in Townsville, but im willing to transport them australia wide at buyers expense


Contact me through the website, or via my mobile on 0418761866


ITEM: Jaycar Electronic Boost controller kit including hand controller and cables.
INFO: Kit numbers KC5387 Independent Electronic Boost Controller Kit and KC5386 LCD Hand Controller kit. Completely built, just requires installing into car and tuning. Comes with all cables and manuals.
CONDITION: Only been run once on car to test the unit after construction, all worked well.
PRICE: $100.00 for the lot
 DSCN0610.JPG   1.26MB   20 downloads


ITEM: Turbosmart Boost Controller
INFO: Just a simple tap type
CONDITION: Came on the car when i brought it 4 years ago, and has not been used since, kept it as a spare.
PRICE: SORRY SOLD
 Image047.jpg   315.57K   1 downloads


ITEM: Whitline Camber Correction Kit
INFO: Kit Number KCA347, suit s13/14/15. Get even tyre wear!
CONDITION: New, never been used/opened
PRICE: $150 SORRY SOLD
 Image046.jpg   387.35K   2 downloads


ITEM: Standard CA18DET ECU
INFO: Comes from a 1990 Manual S13 Silvia with CA18DET
CONDITION: Good
PRICE: $100.00
 DSCN0604.JPG   1.2MB   1 downloads


ITEM: Standard CA18DET Silvia Airbox and afm
INFO: All in good working condition includes Blitz high performance air-filter which has only been used for aprrox 5,000kms
CONDITION: As above
PRICE: $80.00
 DSCN0608.JPG   1.29MB   1 downloads


ITEM: Standard Silvia (SR Model) Grill
INFO: The late model SR20DET equiped silvias came with this type of grill, this grill is less faded then most and would tidy up any silvia.
CONDITION: Has small repair made on a mount when i came across it. Fits and holds well.
PRICE: $20.00
 SRFront.jpg   183.92K   1 downloads
 SRBack.jpg   173.98K   1 downloads

ITEM: Set of 16" Alloy Rims
INFO: Multifit 4 stud pattern, off S13 Nissan Silvia. Suit most small jap 4 stud cars. They do not come with tyres
CONDITION: Minor gutter rash on the rims which you can only notice up close
PRICE: $200 SORRY SOLDPending payment
 000_0582.JPG   1.21MB   9 downloads
 Image053.jpg   524.79K   10 downloads

Edited by YLD_13, 20 December 2008 - 01:09 PM.

[GSR]

Do you have the front bar mate? If so I'm interested.

[YLD_13]

Sorry mate, i dont have a spare front bar.

I do have a bumper indicator laying around somewhere though, cant remember if its left or right. If you find a bumper with no indicators i should be able to help you out with one.

Let me know if your interested in anything else on this page.

[YLD_13]

No one interested in any of these parts? Throw me a offer, need all of these parts gone asap!!!

[Timmaahh]

Reckon those rims would fit on a civic hatch?

[ohbaby]

$100 ! Thats a good price unbuilt they both retail for $139.90 As I work at Jaycar Cairns, building them can be a hard task for some people. We sell alot of them and have none come back so a very good buy

[YLD_13]

Tim - Sorry tim, these wheels are sold pending payment. Will let you know if buyer falls through. The wheels have 4x114.3 stud pattern and im not sure of offset, if sale falls through i will do some research for you and find out if they will fit the honda.

Ohbaby - Thanks, they are a little fiddily to put together but you just need a bit patients. Some of the soldering could have been a little neater, but in the end the unit came up looking clean and works well. It has been tested but never put to full time use, so its basically in brand new condition. I think its a steal at this price, im surprised no one has picked it up yet.

[YLD_13]

Hey guys, have to move next month and really want all this stuff gone. Make me an offer! Hell make me a rediculous offer and just resell it again and make some money! hahaha. Just want it all gone. Bump

[DEM82]

YLD_13 have you used the Jaycar brand boost controller before ? and if so what sort of consistancy/functions do they have ?

Davo

[Pedro01]

15 bucks for ecu

[YLD_13]

Davo - Main Features of boost controller:- Drives any boost control solenoid (I have a standard solenoid from a S1 S14 200sx which i will included), switchable between 2 different boost maps, full waste-gate anticreep function, boost curves can be mapped at up to 64 different postitions, can set duty cycle of waste gate valve in 1% increments, interpolation between adjacent loads, real time and view modes, and boost level always matched to throttle requested power. Hand unit is backlit and is easy to use/read. In all man, basically a fairly standard electronic boost control unit, wont do any flash stuff like e-boost 2(half of which im sure nobody uses anyway), but will allow you to map your boost to whatever curve you would like and doesnt cost the earth.

Billy Bob - You have a pm