Mundoo Drags
#1
Posted 30 March 2009 - 11:09 AM
Council has approved a drag racing meet at Mundoo on the 20th & 21st June .
Does any 1 have anymore info?
#2
Posted 30 March 2009 - 12:43 PM
I'll be checking with a few mundoo members and see if this is happening, really hope it is, had such a ball last time.
If I hear of a confirmation of the event I'll reply here.
Cheers for the heads up though.
Apexi intake/exhaust, DMS coilovers, Coil-over-plug setup, Cusco braces, Metal-cat, EBC brakes, Alloy/silicone cooling, Adj cam gears, Upgraded 16G turbo, S/steel manifold and dump, Go-pro camera, Straight-jacket!
#3
Posted 30 March 2009 - 01:35 PM
I wouldn,t mind betting its been ok,d but weather anybody wants to organise/run the meet may be a different story.
#4
Posted 30 March 2009 - 03:18 PM
I wouldn,t mind betting its been ok,d but weather anybody wants to organise/run the meet may be a different story.
Yeah,as far as I thought it wasn't going to happen again.
Hope I'm wrong!!!

#5
Posted 30 March 2009 - 03:50 PM

I don't like being told what to do, and when some aluminium cased box of gears and friction plates tells me that it's time to change up, I really get pissed off. I will decide when it's time to change gears and sometimes I'm right. So the old smarty-pants automatic transmission isn't my best friend
#6
Posted 30 March 2009 - 06:09 PM

Support the future of Drag Racing in FNQ. Click here
www.CairnsBurnouts.com
#7
Posted 30 March 2009 - 07:37 PM
#8
Posted 31 March 2009 - 08:49 AM
Still not a definate yet, but I beleive the club will hold a meeting to decide if it will go ahead.
Fingers crossed peoples, hopefully it'll be on!
Apexi intake/exhaust, DMS coilovers, Coil-over-plug setup, Cusco braces, Metal-cat, EBC brakes, Alloy/silicone cooling, Adj cam gears, Upgraded 16G turbo, S/steel manifold and dump, Go-pro camera, Straight-jacket!
#9
Posted 31 March 2009 - 08:54 AM
#10
Posted 31 March 2009 - 01:08 PM
#11
Posted 31 March 2009 - 02:17 PM
1/8 mile.
If it starts up again, I'll run the XR6
If you don't read this in every thread. I am probably banned.
#12
Posted 31 March 2009 - 04:29 PM
Tuned By Dave At CPV
304rwkw - 1095nm on 14psi boost
11.6sec @ 114.2mph 
#13
Posted 31 March 2009 - 06:43 PM
#14
Posted 20 April 2009 - 08:28 PM
#15
Posted 20 April 2009 - 09:42 PM
#16
Posted 21 April 2009 - 12:02 AM
#17
Posted 22 April 2009 - 09:09 PM
#18
Posted 28 May 2009 - 05:07 AM
the silver sleeper
#19
Posted 29 May 2009 - 10:03 PM
980+hp XR6 TURBO
BUILT, TUNED & SUPPORTED BY
FORCED PERFORMANCE, 6BOOST & DLM
#20
Posted 30 May 2009 - 05:24 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users











