Cairns Auto Spectacular
#161
Posted 29 September 2009 - 10:49 PM
"THE PATH OF THE GTI-R IS BESET WITH PERIL BY THE INJUSTICES OF THE SPEED CAMERA AND THE TYRANNY OF OTHER DRIVERS. BLESSED IS HE WHO OVERTAKES THE EVO & STI THROUGH THE VALLEY OF HAIRPIN TURNS, FOR HE IS TRULY HIS CAR'S TUNER AND THE FINDER OF LOST HORSEPOWER. . . AND WE SHALT STRIKE DOWN WITH GREAT BOOST AND FURIOUS ACCELERATION ON WHOEVER DOTH ATTEMPT TO OBSTRUCT OR DELAY OUR OVERTAKING. . .
AND YOU SHALT KNOW OUR NAME IS RNN14 WHEN WE LAY THY VEGENCE UPON THEE."
Nissan RNN14 GTi-R Such An Obsession
God Created Turbo Lag To Give V8s A Chance..
mmm AWD Nothing But Traction . . .
#162
Posted 30 September 2009 - 01:05 AM
Peter aka Slapy. VR HSV Clubsport in build process. E36 Beamer SR20DET

Cougar Motors
For all mechanical repairs
297 Draper St - Cairns
#163
Posted 30 September 2009 - 04:15 PM
51APY, on 30 September 2009 - 01:05 AM, said:
i thought i was roadkill a couple of time at the go to whoa finish, it was all over the place.
pretty nice and clean looking car but, plenty of herbs
Apexi intake/exhaust, DMS coilovers, Coil-over-plug setup, Cusco braces, Metal-cat, EBC brakes, Alloy/silicone cooling, Adj cam gears, Upgraded 16G turbo, S/steel manifold and dump, Go-pro camera, Straight-jacket!
#164
Posted 30 September 2009 - 06:31 PM

Support the future of Drag Racing in FNQ. Click here
www.CairnsBurnouts.com
#165
Posted 30 September 2009 - 08:43 PM
Peter aka Slapy. VR HSV Clubsport in build process. E36 Beamer SR20DET

Cougar Motors
For all mechanical repairs
297 Draper St - Cairns
#166
Posted 30 September 2009 - 09:19 PM
when he took me for a drive, drove well, was holding onto the jesus christ bar thats for sure
Built not bought
#167
Posted 01 October 2009 - 05:56 AM
is this something you turbo guys practice
#168
Posted 01 October 2009 - 08:45 AM
nah I think he was trying to get some video of his 'wheel' smokin
Apexi intake/exhaust, DMS coilovers, Coil-over-plug setup, Cusco braces, Metal-cat, EBC brakes, Alloy/silicone cooling, Adj cam gears, Upgraded 16G turbo, S/steel manifold and dump, Go-pro camera, Straight-jacket!
#169
Posted 01 October 2009 - 08:34 PM

Support the future of Drag Racing in FNQ. Click here
www.CairnsBurnouts.com
#170
Posted 02 October 2009 - 05:45 PM

Support the future of Drag Racing in FNQ. Click here
www.CairnsBurnouts.com
#171
Posted 02 October 2009 - 08:32 PM
Can't keep up with the boys adding boost to make the grade :(
Keep The Wheels Turning And The Tyre Smoke Churning
http://myweb.westnet....au/meanstreak/
#172
Posted 03 October 2009 - 09:10 AM
The centura did quite well also on that run, a bit too much wheelspin, but good effort to pull up perfect
Apexi intake/exhaust, DMS coilovers, Coil-over-plug setup, Cusco braces, Metal-cat, EBC brakes, Alloy/silicone cooling, Adj cam gears, Upgraded 16G turbo, S/steel manifold and dump, Go-pro camera, Straight-jacket!
#173
Posted 03 October 2009 - 10:12 AM
sinister, on 29 September 2009 - 06:50 PM, said:
sir355, on 29 September 2009 - 08:49 AM, said:
Ah that was you. I would have said hi if I knew. I was up the end I think I filmed a couple of your runs maybe. Didn't get much on film as I was under the stand most of the day.
Yep that was me. Well if you see me around say g'day, because i still have no idea who you are mystery man. lol
Wasn't enough tough 8's
LIVE BY THE SWORD
DIE BY THE SWORD!
' The only courage we need is to be able to step out from our past and move forward'
#174
Posted 03 October 2009 - 11:08 AM
Peter aka Slapy. VR HSV Clubsport in build process. E36 Beamer SR20DET

Cougar Motors
For all mechanical repairs
297 Draper St - Cairns
#175
Posted 15 October 2009 - 02:27 PM
protd, on 27 September 2009 - 07:20 PM, said:
didnt c all this b4 yes the worst day of my life just have to say it has nothin to do with richo its mine and my dads car my dad only works for him my dad built all of richos cars and is very good at it yes im a inexperienced driver with so much power and torque but aint floatin my own boat but there aint to many people that have experenced so much its not the horsepower its the torque i started the skid in top gear everytime and didnt even rev it it is a wepon that will only be used again at willowbank raceway and the likes of those tracks that are made for things of that nature and the car will go to northqueensland nationals in resect of my fathers and many other peoples dear friend mick tinney i wont b doing no more skids ive lernt the very very hard way the car was in bad shape but me and my dad have been workin hard at it and got all the new parts needed all the body is repaired and the new panels are just awaiting to b painted it is running again and all the rest of it and please if you do have footage i dun want it geting out there for allthose persons hu dont have respect for cars like mine
#176
Posted 15 October 2009 - 05:18 PM
with experiance you will learn to drive it and you will skid it again, don't be worried about a little spill..
and yes i fully understand HP and torque, your not the only one that starts their skids in top gear, i to have a car that can do that
i'm sure you have seen my shitter around, not as pretty as your or youyr dads car though..
#177
Posted 21 October 2009 - 10:53 AM
protd, on 15 October 2009 - 05:18 PM, said:
with experiance you will learn to drive it and you will skid it again, don't be worried about a little spill..
and yes i fully understand HP and torque, your not the only one that starts their skids in top gear, i to have a car that can do that
i'm sure you have seen my shitter around, not as pretty as your or youyr dads car though..
yea understand just get the shits coz every1 thinks all my and my dads shit has somthin to do with richo yano its just fustrating for his name always to pop up were ever i go but all that aside just trying to get some money together for some extra shit for my engine to make it completly undrivable
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users











