Jump to content



Round 3 MAKOTRAC SPRINTS entry form


  • You cannot reply to this topic
5 replies to this topic

#1 kitamijin

    QSS P Plater

  • Member
  • 265 posts
  • Gender:Male

Posted 14 July 2010 - 09:50 AM

Hi guys

Attached is the entry form for round 3 of the sprints at Makotrac.

Please contact me if you have any questions about the series or want to race but don't know what you need etc.

Attached File  8th August entry form.pdf   89.04K   5 downloads

Stuart
Silver EVO 8 MR, BC Coilovers, Whiteline sway bar, Blitz exhaust, Ralliart ECU, HKS EVC-S on 22psi.

#2 Evocoop

    QSS Opens

  • Member
  • 967 posts
  • Gender:Male

Posted 28 July 2010 - 08:41 PM

Hey Stuart, Mate did you get something sorted with the barricades on turn 1. That will be excellent if you can get rid of the bollards with the ASSA backing. They really ruin what would be a really fun bit of that track. Also now that you're running under ASSA will you have the forms and stuff for us to attian an Assa licence or is that something I have to organise ourselves befor we come up there again? I'll probably miss the August round but should be a starter for september 12th.
Cheers Coop
Posted Image
Race it. Break it. Fix it. Repeat.
Townsville City Autosports Club

#3 kitamijin

    QSS P Plater

  • Member
  • 265 posts
  • Gender:Male

Posted 30 July 2010 - 07:26 AM

Hi Grant
No still a few problems with the barriers, not so much on getting them but the process of putting them on the track and then taking them away.
For the next race I think we will try running in reverse, don't need barriers to be set up, so we'll see how that goes.
You don't need to get the AASA licence if you don't want to as AASA recognises the CAMS licence. Most of us still use our CAMS licences.

Yeah, I think a couple of us will try and make it down for the Sept race in the Ville too.

Just a reminder for everyone. Entry payments are due by Thursday the 5th, next week if you want to race. This is a race series anyone can get involved with if you really want to. Cars run in classes and there are lots of people to give you a hand.

Stuart
www.nqmp.com.au
Silver EVO 8 MR, BC Coilovers, Whiteline sway bar, Blitz exhaust, Ralliart ECU, HKS EVC-S on 22psi.

#4 kitamijin

    QSS P Plater

  • Member
  • 265 posts
  • Gender:Male

Posted 30 July 2010 - 01:43 PM

Hi guys Here is the updated entry form for the 8th August NQMP sprint. Please use this one and disregard the last one. Supp regs updates and permit number have been added. See you on August 8th.

Attached File  8th August entry form.pdf   101.71K   0 downloads

Silver EVO 8 MR, BC Coilovers, Whiteline sway bar, Blitz exhaust, Ralliart ECU, HKS EVC-S on 22psi.

#5 kitamijin

    QSS P Plater

  • Member
  • 265 posts
  • Gender:Male

Posted 05 August 2010 - 12:06 PM

Last call for those of you wanting to run in the nqmp sprints.
Entry fees must be paid today.

If you don't want to race come up and watch, its free and you'll be supporting local motorsports.

See you on Sunday

Stuart
NQMP
Silver EVO 8 MR, BC Coilovers, Whiteline sway bar, Blitz exhaust, Ralliart ECU, HKS EVC-S on 22psi.

#6 kitamijin

    QSS P Plater

  • Member
  • 265 posts
  • Gender:Male

Posted 12 August 2010 - 07:30 PM

Results for round 3 of the sprints now ready.

Great day, nice weather and a few new drivers. W e managed 5 runs plus a muck around round where we took family and friends on a few flying laps.

A few people made video's so please look on youtube for NQmotorsports for uploads.

Next race is on Sunday 12th September, entry forms will be released in about 2 weeks.

We are also organising another sprint here in Cairns similar to the motorkhana we did last year in Liberty st. We are planning to make it more of a sprint event this time. We hope bringing it into Cairns will help to attract more people into the sport so stay tuned.

Results

Attached File  August 8th time sheet.pdf   154.82K   7 downloads

Stuart
nqmp
Silver EVO 8 MR, BC Coilovers, Whiteline sway bar, Blitz exhaust, Ralliart ECU, HKS EVC-S on 22psi.





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users