1
This topic is locked
Mods include
Turbo/Exhaust
Stainless suspect ebay manifold. braced from the headers. also braced the flange and the waste gate pipe.
Garret GT35/40 0.86 rear housing
38mm tial sport wastegate w/ screamer also have flanges for plumb back.
3.5inch exhaust
de-cat pipe
Varex muffler. (no remote sender but can be manually connected for quiet or loud)
Engine
Bottom end:
2.7L stroker
acl mains and big end bearings
oversize Mahle pistons
H beam rods
R34 GTR nizmo crankshaft
Head:
1.8mm Greaddy Headgasket 88mm bore.
Tomei pon cams inlet/exhaust 256* duration 8.5mm lift
Tomei ajustable cam gear
Plazmaman intake manifold
Plazmaman throttle body
52mm alloy radiator
trust intercooler
oil filter sandwhich plate and front mount oil cooler.
tein super street height and dampener ajustable coil overs
cusco front and rear strut braces.
Vipec ECM
550cc injectors
bosch 044 intank fuel pump.
unknown 2 way diff
excedy cusion button clutch
will come back and add to list when i think of more....
made just over 320kw befor cams were installed with a rich tune on 18psi
looking for 13.5K open to reasonable swaps
best way to contact me would be by text due to work. 0468 950 360
100_0471.JPG 1.21MB
23 downloads
100_0477.JPG 1.35MB
20 downloads
100_0480.JPG 1.37MB
23 downloads
IMG_0417.JPG 1.74MB
39 downloads
IMG_0451.JPG 1.78MB
55 downloads
IMG_0455.JPG 2.28MB
45 downloads
IMG_0564.JPG 1.81MB
35 downloads
Edited by dfry10, 02 October 2011 - 04:50 PM.
or is it to tuff for you lol
