4 replies to this topic

[MRT88]

Here i'm selling my very clean and tidy commy as i have another project on the go but here is what i have done to it.
Re-Spray 6 months ago
brand new jatco 3sp auto full manual reverse pattern and trans brake with a 5000rpm converter
fully preped bottom end with aries forged pistons H-Beam rods arp studs through out
a GT35/40 turbo on a high mount manifold with a teial 50mm external waste gate
4:11 diff gears and a mini spool
i have replaced all rubbers under the vehicle
i have replace all brake rotor for DBA slotted along with new pads
it has a microtec lt10 computer
FMIC
Interiour is all original and still very clean and tidy for its age.
An array of new autometer C2 gauges
I have tried to keep this car a standard looking as possible so its a good street sleeper. it has run a best of 12.5@103mph on 18psi boost only the turbo will supply 30psi so a very mild tune
any more details wanted feel free to call on
0417499717
car will come with rego and a roadworthy
also a set of personalised plates 51CUP ( SIC UP )

UP Date re tuned made 350rwhp and ran a 12.0@111mph turning the tyres still not using trans brake so its got a easy 11.6 in it leaving on 24psi

 IMG_0058.JPG   2.47MB   16 downloads  IMG_0056.JPG   1.51MB   15 downloads
 IMG_0053.JPG   1.43MB   7 downloads  IMG_0057.JPG   1.65MB   7 downloads  IMG_0063.JPG   2.25MB   2 downloads

Attached Files

•  IMG_0059.JPG   2.23MB   19 downloads
•  IMG_0060.JPG   2.08MB   27 downloads
•  IMG_0061.JPG   1.76MB   24 downloads
•  IMG_0062.JPG   2.19MB   12 downloads

Edited by MRT88, 31 October 2011 - 03:03 PM.

[SiKnEsS]

price?

[MRT88]

sorry thought i had it in there $15,000.00 with roady and rego or $14,000.00 as is where is

Edited by MRT88, 31 October 2011 - 02:43 PM.

[MRT88]

Make a offer

[MRT88]

Bump!